Ysi DIQ/S 182-MOD System 182 Manual de usuario descargar pdf (Pagina 46)

Installation System 182

3 - 32

ba76025e01 02/2012

Fig. 3-27 Line power connection.

Note

The complete assignment of the terminal strip is shown in section 3.12.

Warning

No free wires must be allowed to project into the enclosure.

Otherwise, there is a danger that areas safe to contact could come

into contact with dangerous voltages. Always cut off any wires

that are not in use as closely as possible to the cable gland.

9 Connect phases L and N to the terminal strip. Make sure that

the cable assignment agrees with the specification on the

terminal label under the terminal strip.

10 Tighten the coupling ring (pos. 3 in Fig. 3-26).

11 Close the enclosure of the Universal Transmitter.

Terminal

labeling:

X17

X16

100...

240V AC

MAINS

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 153 154

Sin comentarios

Ysi DIQ/S 182-MOD System 182 Manual de usuario Pagina 46